Characteristics of table saws that you must consider

saw bladeIn general, the circular saw is installed under the table, so it is able to split the wood panels. It may even be able to cut metals, but it will depend on the types of metals you are going to use.

Blade: the size of the blade is variable because its diameter can be between 200 and 400mm accompanied by steel teeth. Depending on the type of material and the height of the material to be cut, you can choose the blade according to its use. According to standards, the blade must be surrounded by a protective cover which acts as a protector.

Table: There are two table characteristics, the cast iron table, and the aluminum table. The size of the saw is according to the model because the dimensions for small models are between 60 x 30 cm and large 80 x 70 cm. In any case, from the technical point of view, the work surface is always proportional to its accessories.

Power: so that you can work properly, it is obvious that you will need power. The power of table saws ranges from about 1,000 to 4,000 watts. In addition, the device can be in mono or three-phase mode. The machine can be adapted to your needs. A good table saw for woodworking will be powerful enough to cut through most types of wood.

Weight: like the other characteristics, the weight can be as variable, but must also be proportional to the power, as well as to the different structural materials of your table.

The miter saw: it is useful to reverse the position of the saw to use it on the top of the particular. Its role is therefore quite independent. In addition, it is also useful for miter cuts which are in particular cuts between 0 and 90 degrees relative to the piece of wood. Starting from this fact, the table must, therefore, be equipped with a rotating and graduated plate.